Airflow Systems University: Instruction Manuals, Videos and More

Find installation instructions and product resources for your Airflow Systems equipment.

ASDP5-06 Oil Cooler Inlet Duct

Installation instructions for the ASDP5-06 5-inch 2006X inlet duct. This manual is labeled for the RV-14 and includes a bill of materials, installation steps and illustrated installation figures.

Open ASDP5-06 Installation Instructions (PDF)

Revision A · September 25, 2026 · 4 pages

Please read the entire manual before beginning installation and confirm that it applies to your aircraft configuration.

2008X RV-10 Oil Cooler Kit

Installation instructions for the Airflow Systems 2008X RV-10 oil cooler kit, intended for new-construction or retrofit Van’s RV-10 aircraft. Includes kit contents and installation procedures.

Open RV-10 Oil Cooler Kit Installation Guide (PDF)

Revision A · September 25, 2026 · 11 pages

Please read the entire manual before beginning installation and confirm that it applies to your aircraft configuration.

Oil Cooler Installation Notes

Getting ready to install your oil cooler? Keep these installation notes handy as a reference alongside the instructions for your specific cooler and aircraft configuration. Review the document before beginning, and contact our team if you have questions about your setup.

Open Oil Cooler Installation Notes (PDF)

Slime Fighters

Standard and Mid-Size Slime Fighters

These Slime Fighter Installation Notes apply to both standard and mid-size Slime Fighters.

Open Standard and Mid-Size Slime Fighter Installation Notes (PDF)

Revision A · June 25, 2018 · 1 page

Open Oil/Air Separator Drawing — ASSF-02, Revision A (PDF)

Dimensioned oil/air separator drawing · 1 page

RV-10 Super Slime Fighter

Installation notes for the RV-10 Super Slime Fighter, with illustrated assembly figures.

Open RV-10 Super Slime Fighter Installation Notes (PDF)

Revision A · July 10, 2007 · 1 page

Please read the entire applicable manual before beginning installation and confirm that it applies to your aircraft configuration.

Need help?

For questions about fitment or installation, contact airflowsystems2@gmail.com.